The profile cutting machine is suitable for sawing all kinds of special-shaped metal aluminum, aluminum alloy, copper, copper alloy, non-metallic plastic and carbon fiber materials, especially for aluminum doors and windows, photo frames, plastic steel, electric board, aluminum extrusion, paper tube and profile cutting; the hand-held pressure bar material is not easy to deform and has low loss; the cutting angle is accurate; the vibration is small and the noise is low; the operation is simple and high efficiency Single or multiple saw together. It can be used for 90 ° straight cutting, 90 ° to 45 ° left or right oblique cutting, etc. The grinding wheel cutting machine can cut metal square flat tube, square flat steel, I-beam, channel steel, carbon steel, tube and other materials.
The profile cutting machine adopts single-phase AC series excitation motor as power and drives flat grinding wheel to cut metal tools through transmission mechanism. It has the advantages of safety and reliability, low labor intensity, high production efficiency and smooth cutting section. It is suitable for AC 50 / 60 Hz and rated voltage of 220 v. It is widely used for cutting round steel pipe, special-shaped steel pipe, cast iron pipe, round steel, channel steel, angle steel, flat steel and other profiles.
1. The profile cutting machine is composed of series excitation motor, transmission mechanism, shield frame, base and rotatable clamp.
2. Single phase AC motor is divided into single insulation profile cutting machine and double insulation cutting machine according to whether there is additional insulation between stator and rotor and ground.
3. The angle between the jaw of the clamp holding the workpiece and the grinding wheel shaft can be adjusted from 0 to 45 degrees on the left and right, and the right position of some products can be adjusted from 0 to 30 degrees.
4. The parallel grinding wheel used in profile cutting machine is fiber reinforced resin sheet grinding wheel, its diameter is not more than 406 mm, and the rated linear speed is not more than 80m / s.
1. Hidden saw blade, low noise, high safety.
2. Foot switch, automatic pressing and sawing.
3. Use 12mm rubber block to press material, which is not easy to be damaged.
4. Single or multiple saws can be used together.
The cutting accuracy can be improved by 5.800mm long feeding channel plate.
6. Automatic oil injection on both sides, the oil quantity can be adjusted separately, the cutting surface has no burr, and the saw blade is more durable.
7. The machine is machined by computer, and the precision of sawing is high.